OD14mm ID10mm PETGチューブ
PETG製
Made in China
XSPC G1/4" to 14mm Rigid Tubing - Triple Seal (Chrome)
XSPC G1/4″ to 14mm Rigid Tubing - 90° Rotary Fitting (Chrome)
XSPC 14mm Rigid Tubing Elbow Fitting (Chrome)
上記３点のフィッティングには相性が悪い為、使用出来ません。
Product Code : B-PETGWP14-50
FEATURES
Easy to Cut
High Transparency
Extremely Durable
SPECIFICATIONS
Specifications
Inner Diameter (ID): 10mm
Outer Diameter (OD): 14mm
Wall Thickness:2mm
Length: 500mm
Compatibility
Fittings:14mm OD Rigid Fittings
PARTS INCLUDED
500mm PETG tube
WARNINGS
With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid PETG Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.
Bykski is not responsible for any damage caused by or when using this product. Please use at your own risk.
INSTALLATION
PLEASE NOTE: When using a bending insert with PETG, remember it is meant to have a tight fit. If it is loose, the rigid tube will collapse, kink, form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience, but will become easier the more you practice.
The bending insert requires some stretching and lubricating to get it in the rigid tube. Steps to success are below:
1. Stretch the bending insert. Remove any excess that isn’t stretched.
2. Ream the rigid tube with an RFB for best results, (or a hand reamer if that's all you have). This will ensure a clean opening for easier insertion.
3. Lubricate by applying several drops of dish soap or olive oil on the bending insert itself and then place several more drops into the rigid tube.
4. Work the bending insert into the rigid tube. The more you use the insert, the easier this process will become.
BYKSKIの製品に関してはお客様の手元に届いた日から起算して10日間の初期不良対応のみとさせて頂きます。
商品到着後直ぐに動作確認を行って下さい。
- OD 14 mm
